STAR TEAK PROTETTIVO

STAR TEAK PROTETTIVO

COLOURLESS

Solvent based protective teak oil sealer specifically formulated for the treatment and maintenance of teak and other precious woods, providing suitable protection from the sun and from weather exposure in marine environment. Particularly used on boat decks made of teak or similar woods. STAR TEAK PROTETTIVO (Sealer) is part of the Star Teak Line, also including Star Teak Sbiancante (Brightener) and Star Teak Detergente (Cleaner). Available in the amber version (Star Teak Protettivo cod.6D4892) or in the colourless version with UV filters added (Star Teak Protettivo UV cod.6D4597)

Brand : SKIPPER'S LINE MARINE PAINTS
Description

SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM

New Wood. The surface should be clean, dry and sandpapered. Remove dust. Apply a first coat of STAR TEAK PROTETIVO (Sealer) by brush or by a soft pad evenly all over the surface and let dry for 24 hours. In the caase of particular dry wood, repeat application few times allowing 1-2 hours between applications.

Old Wood. Wet the wood surface with fresh water and apply STAR TEAK DETERGENTE (Cleaner) evenly all over the surface and let it stand for 5-10 minutes. Any trace of grease or dirt should be removed using a nylon brush. Rinse with plenty of fresh water. In case it would be necessary to brighten the shade of wood or any blackish shade caused by the natural ageing of wood, then apply on the wet SURFACE STAR TEAK SBIANCANTE (Sbiancante) by brush. Use a nylon brush to brush off the surface, rinse with plenty of water and let dry for 24 hours. In case of difficult stains repeat the application with Star Teak Brightener. Apply STAR TEAK PROTETTIVO (Sealer) by brush or by a soft pad and let dry for 24 hours. In the case of particular dry wood, repeat application few times allowing 1-2 hours between applications. When hot temperatures are present  it can be necessary to repeat the application specially on those areas where ther wood is more worn out or dull.

Product Specification
STAR TEAK LINE
STAR TEAK PROTETTIVO
Paint Type
One component
Specific gravity kg/lt (±0,05)
0.850
Viscosity Ford ø 8 at 20°C ±2
15-18 sec (Ø4 a 20°C)
Viscosity Ford Ø4
15-18 sec. (20°C)
Dust dry
1-2 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
According to the absorption
Colors
AMBRATO, INCOLORE
Binder type A
Alkyd modified
Solids content (volume) ±2
13%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
Ready to use or diluted with Thinner 107 if required
Recoat time
1-2 h
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
9-13
Color code
6D4892, 6D4597