SERENISSIMA SPRAY

SERENISSIMA SPRAY

Fast drying antifouling in a spray can for propellers and stern drives. Provides good adhesion on fibreglass, plastic or metal surfaces and on previously coated parts, with the exception of aluminium surfaces where it should be applied over a suitable primer. Protects surfaces from marine fouling. Available in Black, Grey, White and as a Transparent finish. 

Brand : SKIPPER'S LINE MARINE PAINTS
Description

SURFACE PREPARATION AND APPLICATION

 

Propellers and stern drives. The application should be carried out in dry and well ventilated place as moisture may cause a dull finish and slow drying process. The surface to be coated should be adequately prepared by removing traces of  loose or flaking paint, grease, rust, dust and any contamintion which could affect the final result. Product should be sprayed in an horizontal way at first and after in a vertical way. Allow at least 10 minutes drying between coats for “wet on wet” applications. Repeat few times application in thin layers. Hold the spray can in a vertical position at a distance of at least 20-25 cm. For best result apply product at a temperature of at least 20°C. Shake cans for at least one minute before each application. In case of  continuous application stop and shake cans from time to time. In case of obstruction of the nozzle this can be cleaned simply by sinking the part into a solvent for a few minutes. Once the application has been completed turn the spray can upside down and keep spraying for a few seconds ( this will allow the special self cleaning valve to complete the cleaning process of  internal pipe).

Product Specification
MISCELLANEUOS
SERENISSIMA SPRAY
Paint Type
One component
Code & colour A
White-94BANB - Black-94BANN - Grey-94BANG - Transp.-94BANT
Viscosity Ford ø 8 at 20°C ±2
12-14 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
12-14
Spray
Ready for use
Dust dry
15 minutes (20c)
Recoat time
min. 8-12 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
2-4
Color code
94BANG, 94BANB, 94BANN, 94BANT
Binder type A
Thermoplastic acrylic resins
Specific gravity kg/lt (±0,05)
0.850
Shelf life (+10+30°C)
18 months in airtight cans
Application
Spray
Touch dry
approx.15-20 minutes
Launching time
Min 24-48 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
20-30 microns
Colors
GRIGIO, BIANCO, NERO, TRASPARENTE