EPOSEALER INCOLLAGGIO

EPOSEALER INCOLLAGGIO

Two-component epoxy liquid resin, free from solvents, hardened with cicloaliphatic ammine to provide high adhesion and sealing power. Used for guing wood to wood, wood to fibreglass or fibreglass to fibreglass. It should be applied at temperature above 10°C.

Brand : SKIPPER'S LINE MARINE PAINTS
Description

SURFACE PREPARATION AND APPLICATION SYSTEM


GLUING WOOD+WOOD / WOOD+FIBREGLASS / FIBREGLASS+FIBREGLASS.
Clean, degrease and if possible sanpaper the substrated to be glued, which should be solid and in good conditions. Mix the two component in the ratio of 2 parts of Sol.A with 1 part of Sol.B by volume, stir thoroughly for a few minutes. Then apply by brush or by a dented spatula the product onto both parts to be glued. Stick the two parts and hold firmly together with a clamp. Curing process starts after 3-4 hours and will be completed after approx. 7 days (after this period the structural performance will be definitive). 

Product Specification
RESINS & GELCOAT
EPOSEALER INCOLLAGGIO
Paint Type
Two components
Code & colour A
G44201
Specific gravity kg/lt (±0,05)
1.136 (A) - 0.970 (B)
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller
Pot life A+B (20°C)
Use mixture within 30-50 minutes
Brush-Roller
Ready to use
Recoat time
24 h ( 20°)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
5
Color code
G44201
Binder type A
Liquid epoxy resin
Code & colour B
8Z6026
Viscosity Ford ø 8 at 20°C ±2
12 sec. (Ø8 a 20°C)
Viscosity Ford Ø4
12 seconds
Mixing ratio A+B by volume
2 parts Sol.A with 1 part Sol.B
Temperature Pot Life
20°C
Curing time
7 days
Application temperature
Between +10 C and +40 C
Dry film thickness advised
100 microns per coat
Colors
NEUTRO