EPOWOOD

EPOWOOD

Two-component epoxy coating performing excellent adhesion, waterproofing and mechanical characteristics such as flexibility and long term resistance. It may even glue surfaces which are not perfectly dry. Used for anti-osmosis treatment in fibreglass boat bottom. EPOWOOD can be applied both on an appearently sound gelcoat or after that the faulty gelcoat has been removed completely. Also applied as anticorrosive primer for metal (cast iron and light alloys parts etc.). It is also used for gluing purposes (e.g. wood to wood, wood to fibreglass etc.). Used also for restoring old wooden boats, EPOWOOD penetrates the surface conferring adequate waterproofing and mechanical resistance. EPOWOOD is also applied for repairing purposes when used in combination with fibre sheets.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare or restored wood - The surface should be dry, clean and dusted off. Apply 2-3 coats of EPOWOOD; sandpaper between coats.
Product Specification
VARNISHES
EPOWOOD
Paint Type
Two components
Binder type B
Polyammide
Solids content (volume) ±2
37%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Pot life A+B (20°C)
use within 4 hours
Touch dry
2 h (20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
according to absorption
Colors
TRASPARENTE
Binder type A
Epoxy
Specific gravity kg/lt (±0,05)
1.030 (A) - 0.910 (B)
Viscosity Ford ø 8 at 20°C ±2
17 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
17 sec. (20°C) A+B
Mixing ratio A+B by volume
1 part Sol. A with 1 Sol. B
Brush-Roller
Ready to use or diluted with Thinner 765 if required
Recoat time
Minimum 6 max 24 h (20°c) after 24 h sand down
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
12-14
Color code
3P5958