POLISATIN

POLISATIN

Two-component polyurethane satin varnish (40 gloss) used for the interiors of wooden boats where a satin finish is desired. Enhances the characteristics of wood and it can be applied on floors, tables, furniture etc., providing good resistance to scratch, abrasion and to most common stains.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Wood - In order to obtain “closed-pore” smooth surface, apply two coats of POLIGLASS varnish diluted up to 50-100% (according to wood absorption). If the pores on the wood is coarse, a third coat, less diluted, may be required. Let dry for 8-12 hours, rub down with fine abrasive-paper and apply 2-3 coats of POLISATIN varnish allowing the recommended waiting time between coats. - On the other hand, if a surface with “open-pore” is desired, apply a single coat of POLIGLASS thinned 50-100%, (according wood absorption). Let dry for 8-12 hours, rub down with fine abrasive-paper and apply 2-3 coats of POLISATIN varnish allowing the recommended waiting time between coats. Previously Varnished Wood - Test a small patch of the coated surface to verify if POLIGLASS is compatible with the old varnish and to make sure that the old coating is still in sound condition. - If the old coating is in good condition and compatible, sandpaper and overcoat with 2-3 coats of POLIGLASS varnish allowing 8-12 hours between coats. Apply then 2-3 coats of POLISATIN varnish allowing the recommended waiting time between coats. - In the case of loose, powdery or non-compatible old varnish, it is recommended that the old varnish should be stripped completely down to bare wood with a paint-remover or by scraping and sandpapering. Then follow the application directions as suggested for bare wood.
Product Specification
VARNISHES
POLISATIN
Paint Type
Two components
Binder type B
Mix of isocyanic
Code & colour B
8ZMAT
Solids content (volume) ±2
31%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Pot life A+B (20°C)
use within 4-6 hours
Spray
5-10% Thinner 203
Recoat time
8-12 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
8
Color code
5P0000
Binder type A
Poliurethane
Code & colour A
5P0000
Specific gravity kg/lt (±0,05)
0.975 (A) - 1.030 (B)
Viscosity Ford ø 8 at 20°C ±2
15-20 sec.(Ø4 a 20°C)
Viscosity Ford Ø4
15-20 sec. (20°C):
Mixing ratio A+B by volume
2 parts Sol.A with 1 Sol.B
Brush-Roller
0-5% Thinner 205
Dust dry
5-15 minutes (20c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
TRASPARENTE