ACRIGLASS UV

ACRIGLASS UV

Extra-gloss clear non-yellowing varnish with UV filters added, providing a long lasting gloss and flexible finish both on new and classic old wooden boats. Protects against ageing due to sun exposure.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE New or restored bare Wood. - In order to obtain “closed-pore” smooth surface, apply two coats of POLIGLASS varnish diluted up to 50-100% of THINNER 203 (according to wood absorption). If the pores on the wood is coarse, a third coat of POLIGLASS, less diluted, may be required. Let dry for 12-16 hours, rub down with fine abrasive-paper and apply 2-3 coats of ACRIGLASS UV allowing 24 hours between coats. - On the other hand, if a surface with “open-pore” is desired, apply a single coat of POLIGLASS thinned 50-100% with THINNER 203, (according wood absorption). Let dry for 12-16 hours, rub down with fine abrasive-paper and apply 2-3 coats of ACRIGLASS UV allowing 24 hours between coats Previously Varnished Wood. Test a small patch of the coated surface to verify if ACRIGLASS UV is compatible with the old varnish and to make sure that the old coating is still in good condition. -If the old coating is in good condition and compatible, sandpaper and overcoat with 2-3 coats of ACRIGLASS UV allowing 24 hours between coats. -In the case of loose, powdery or non-compatible old varnish, it is recommended that the old varnish should be stripped completely down to bare wood with a paint-remover or by scraping and sandpapering. Then follow the application directions as suggested for bare wood.
Product Specification
VARNISHES
ACRIGLASS UV
Paint Type
Two components
Binder type B
Aliphatic Isocyanate
Solids content (volume) ±2
41%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Pot life A+B (20°C)
use within 4-6 hours
Spray
20-30% Thinner 203 or 10-15% Thinner 201
Recoat time
24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10-12
Color code
5WUV00
Binder type A
Poliacrylic
Specific gravity kg/lt (±0,05)
1.020 (A) - 1.000 (B)
Viscosity Ford ø 8 at 20°C ±2
45 sec.(Ø4 a 20°C)
Viscosity Ford Ø4
45 sec. (20°C)
Mixing ratio A+B by volume
2 parts Sol.A with 1 Sol.B
Brush-Roller
10-15% Thinner 205 or 5-10% Thinner 201
Dust dry
40-50 minutes (20c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
TRASPARENTE