STARWIND UV

STARWIND UV

One-component gloss varnish based on phenolic resin and tung oil with UV filters added, for an extra-brilliant long lasting and non-yellowing clear finish withstanding marine environment. The phenolic modification combined with the selected type of fine quality resin and the high solids content make of this varnish a high performance product for a long term resistance in the marine environment. It is important not to exceed in the recommended thickness and that the required waiting time between coats be allowed.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Wood The surface should be clean and dry, sandpapered and dusted off. Apply a first coat of STARWIND UV onto bare wood, highly diluted up to 50-70% (depending on wood absorption) in order to allow the varnish to sink into the wood substrate. (As a clear primer alternative, one coat of POLIGLASS two-component varnish diluted 50-100% (depending on wood absorption) with Thinner 203 can be applied; care should be taken in order to maintain the grain of the wood open so to enable the application of subsequent coats of STARWIND UV. Overcoat then with 4-5 coats of STARWIND UV to obtain a high quality gloss finish, allowing the required recoat time between coats. Do not exceed the recommended thickness. Previously Varnished Wood - If the old paint is in poor conditions, loose or powdery, it should be mechanically removed. Clean the surface well and follow application directions as per bare wood. - If the old paint is in good condition of adhesion and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), clean,degrease and sandpaper with medium-fine abrasive paper and apply 2-3 coats of STARWIND UV to obtain a high quality gloss finish, allowing the required recoat time between coats. Do not exceed the recommended thickness.
Product Specification
SPACE ADDITIVES
STARWIND UV
Paint Type
One component
Specific gravity kg/lt (±0,05)
0.950
Shelf life (+10+30°C)
18 months in airtight cans
Application
Brush-Roller-Spray
Spray
10-20% Thinner 900
Recoat time
24-48 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
12-13
Color code
6ZUV00
Binder type A
Phenolic resins-Tung oil
Solids content (volume) ±2
59%
Viscosity Ford Ø4
220-240 sec.
Brush-Roller
10-15% Thinner 107 or 109
Touch dry
8-12 h (20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
max.40 microns per coat
Colors
TRASPARENTE