SUPERWIND SATINATA

SUPERWIND SATINATA

Traditional urethane varnish with excellent filling power and resistance in the marine environment. Applied on wooden boats, furniture, handrails, external frames, etc. to obtain a velvet non-reflecting satin finish.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Wood - The surface should be clean and dry, sandpapered and dusted off. Apply a first coat of SUPERWIND (gloss) varnihs onto bare wood, highly diluted up to 50-70% (depending on wood absorption) in order to allow the varnish to sink into the wood substrate. As a clear primer alternative, one coat of POLIGLASS two-component varnish diluted 50-100% (depending on wood absorption) with Thinner 203 can be applied; care should be taken in order to maintain the grain of the wood open so to enable the application of subsequent coats of SUPERWIND SATINATA. Overcoat then with 3-4 coats of SUPERWIND SATINATA to build up adequate thickness, allowing the required waiting time between coats. Apply 1-2 coats of SUPERWIND SATINATA in order to get a velvet satin finish. Previously Varnished Wood - If the old paint is in poor conditions, loose or powdery, it should be mechanically removed. Clean the surface well and follow application directions as per bare wood. If the old paint is in good condition of adhesion and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), clean,degrease and sandpaper with medium-fine abrasive paper and apply 2-3 coats of SUPERWIND SATINATA varnish, allowing the required waiting time between coats.
Product Specification
VARNISHES
SUPERWIND SATINATA
Paint Type
One component
Specific gravity kg/lt (±0,05)
0.973
Viscosity Ford ø 8 at 20°C ±2
18-20
Application
Brush-Roller-Spray
Spray
10-20% Thinner 900
Recoat time
24 h
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
12-13
Color code
6ZA0000
Binder type A
Urethane modified
Solids content (volume) ±2
56%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
10-15% Thinner 107 or 109
Touch dry
6-8 h
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
TRASPARENTE