SUPERWIND LUCIDA

SUPERWIND LUCIDA

Traditional urethane varnish with excellent filling power, brilliancy and resistance in the marine environment. Applied on wooden boats, furniture, handrails, external frames, etc. to obtain a classic gloss finish.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Wood - The surface should be clean and dry, sandpapered and dusted off. Apply a first coat of SUPERWIND onto bare wood, highly diluted up to 50-70% (depending on wood absorption) in order to allow the varnish to sink into the wood substrate. As a clear primer alternative, one coat of POLIGLASS two-component varnish diluted 50-100% (depending on wood absorption) with Thinner 203 can be applied; care should be taken in order to maintain the grain of the wood open so to enable the application of subsequent coats of SUPERWIND LUCIDA varnish. Overcoat then with 4-5 coats of SUPERWIND LUCIDA, allowing the required waiting time between coats. Previously Varnished Wood - - If the old paint is in poor conditions, loose or powdery, it should be mechanically removed. Clean the surface well and follow application directions as per bare wood. - If the old paint is in good condition of adhesion and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), clean,degrease and sandpaper with medium-fine abrasive paper and apply 2-3 coats of SUPERWIND LUCIDA varnish, allowing the rrquired waiting time between coats.
Product Specification
VARNISHES
SUPERWIND LUCIDA
Paint Type
One component
Specific gravity kg/lt (±0,05)
0.930
Shelf life (+10+30°C)
18 months in airtight cans
Application
Brush-Roller-Spray
Spray
10-20% Thinner 900
Recoat time
24 h
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
12-13
Color code
6Z0000
Binder type A
Urethane modified
Solids content (volume) ±2
57%
Viscosity Ford Ø4
120-130
Brush-Roller
10-15% Thinner 107 or 109
Touch dry
6-8 h
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
TRASPARENTE