TOPKAPI OPACA

TOPKAPI OPACA

One-component clear matt varnish for wood. Recommended for a matt finish on interiors of wooden boats, for furniture, doors, windows and all wood substrates.Easy to brush provides good characteristics of adhesion and resistance in marine environment.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Wood - The surface should be clean and dry, sandpapered and dusted off. Apply a first coat of TOPKAPI OPACA onto bare wood, highly diluted up to 50-70% (depending on wood absorption) in order to allow the varnish to sink into the wood substrate. As a clear primer alternative, one coat of POLIGLASS two-component varnish diluted 50-100% (depending on wood absorption) with Thinner 203 can be applied; care should be taken in order to maintain the grain of the wood open so to enable the application of subsequent coats of TOPKAPI OPACA. Overcoat then with 2-3 coats of TOPKAPI OPACA, allowing the required waiting time between coats. Previously Varnished Wood - - If the old paint is in poor conditions, loose or powdery, it should be mechanically removed. Clean the surface well and follow application directions as per bare wood. - If the old paint is in good condition of adhesion and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), clean,degrease and sandpaper with medium-fine abrasive paper and apply 2-3 coats of TOPKAPI OPACA, allowing the rrquired waiting time between coats. Note: In the summer season or when temperatures are higher than 20°C, it is recommended for brush application the use of flowing THINNER 109.
Product Specification
VARNISHES
TOPKAPI OPACA
Paint Type
One component
Specific gravity kg/lt (±0,05)
0.950
Viscosity Ford ø 8 at 20°C ±2
20-25 sec.
Application
Brush-Roller-Spray
Spray
20-30% Thinner 900
Recoat time
24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10
Color code
6BA000
Binder type A
Alkyd-synthetic
Solids content (volume) ±2
47%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
15-20% Thinner 107 or 109
Touch dry
6 h (20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
TRASPARENTE