INTERNO SCAFI / BILGE PAINT

INTERNO SCAFI / BILGE PAINT

One-component product specifically formulated for application on interiors of hulls to provide adequate protection on steel, fibreglass or wooden boats. It is a fast drying paint with excellent resistance to sea water and fuels. Recommended for bilges, floors and engine rooms. Two coats application is recommended. Available in grey or white finish.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Steel - The substrate should be clean, dry and well degreased. Remove trace of corrosion and apply 1 coat of EVIOX CROMOMINIO Overcoat then with 2 coats of INTERNO SCAFI / BILGE PAINT allowing 18-24 hours between coats. Bare Wood - The surface should be clean, dry and well seasoned. If necessary apply 1 coat of EVIOX CROMOMINIO diluted up to 30-40% and let dry for 12-24 hours. Overcoat with 2 coats of INTERNO SCAFI / BILGE PAINT allowing 18-24 hours between coats. Previously Painted surfaces - - If the old paint is in poor condition, loose or powdery, it should be mechanically removed and procedure as per Bare substrate should be followed in such event. - If the old paint is in good condition and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate, degrease and sandpaper with medium-fine abrasive paper the surface; remove dust, clean well and apply 2 coats of INTERNO SCAFI / BILGE PAINT allowing 18-24 hours between coats.
Product Specification
ENAMELS
INTERNO SCAFI / BILGE PAINT
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.420
Viscosity Ford ø 8 at 20°C ±2
14-16 sec.
Application
Brush-Roller-Spray
Spray
10-30% Thinner 900
Recoat time
18-24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10-12
Color code
4S3909, 4S4478
Binder type A
Alkyd modified
Solids content (volume) ±2
45%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
5-10% Thinner 400
Dust dry
2 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40-50 microns per coat
Colors
BIANCO, GRIGIO