TOPKAPI

TOPKAPI

One-component, polyurethane gloss non-yellowing topcoat of superior quality for a long lasting brilliant finish of boats. High coverage, weather resistance in marine environment, and pure colours make of this product the best choice for a high quality one-component finish. Available in a wide range of special marine colours for an excellent spray or brush finish application.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION ANDAPPLICATION PROCEDURE - Bare Steel - The substrate should be clean, dry and well degreased. Remove traces of corrosion and apply 1 coat of suitable primer (e.g. SOTTOFONDO NAUTICA or EVIOX CROMOMINIO) and let dry. Overcoat with 2 coats of TOPKAPI ENAMEL allowing 18-24 hours between coats. Bare Wood - The surface should be clean, dry and well seasoned. If necessary apply one coat of POLIGLASS VARNISH diluted 50-70% or more, or LIGNUM IMPREGNANTE as alternative, without build up a film on the surface. After 24 hours apply 1 coat of SOTTOFONDO NAUTICA ad let dry for 24 hours. Overcoat with 2 coats of TOPKAPI ENAMEL allowing 24 hours between coats. Previously Painted Surfaces - Loose or powdery old paints should be mechanically removed. Clean the surface well and follow application directions as per bare substrat. If the old paint is in good condition and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), degrease and sandpaper with fine abrasive paper the surface; remove dust, clean well and apply 2 coats of TOPKAPI ENAMEL allowing 24 hours between coats. Note: In the summer season or when temperatures are higher than 20°C, it is recommended for brush application the use of flowing THINNER 109.
Product Specification
ENAMELS
TOPKAPI
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.000 - 1.215 according to colour
Viscosity Ford ø 8 at 20°C ±2
14-16 sec.
Application
Brush-Roller-Spray
Spray
10-25% Thinner 900
Recoat time
18-24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
11-13
Color code
2QT080, 2QT070, 2QT020, 2QT050, 2QT108, 2QT116, 2QT119, 2QT121, 2QT124, 2QT122, 2QT126, 2QT110, 2RT113, 2QT142
Binder type A
Alkyd-urethane
Solids content (volume) ±2
53%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
10-20% Thinner 107 or 109
Touch dry
2-3 h (20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40-50 microns per coat
Colors
BIANCO, NERO GONDOLA, GHIACCIO, AVORIO, MARRONE, GRIGIO CHIARO, GRIGIO MEDIO, AZZURRO CIELO, AZZURRO LUMINOSO, BLU OCEANO, VERDE SMERALDO, GIALLO CROMO, ROSSO VIVO, BLU MARINO