LONG LIFE STC WHITE

LONG LIFE STC WHITE

Hard matrix antifouling formulated with copper thyocianate providing excellent antifouling power and coverage properties. It can be used over any type of boat, including aluminium boats, since the type of copper salt used does not impair the substrate. Suitable for boats with speed also above 30 knots.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Steel bottom - Apply 1 coat of EPOZINC 2C or EPOFOND AM-9 on sandblasted steel according to SA 2,5 and let dry for 12-24 hours. (If sandblasting is not possible proceed with mechanical cleaning to bring the surface to bare steel, apply 1 coat of EVIOX CROMOMINIO and let dry for 8-12 hours.) Apply then 2 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat then with 2 coats of LONG LIFE STC WHITE antifouling allowing min.6 hours between coats. Bare Wood bottom - Apply one coat of EVIOX CROMOMINIO and allow to dry for 8-12 hours. Apply 2 coats of SOLVER PRIMER allowing 24 hours between coats followed by 2 coats of LONG LIFE STC WHITE antifouling allowing min. 6 hours between coats. Fibreglass - Degrease with suitable cleaner and rinse with water the surface to be coated. Sand with fine abrasive paper and remove dust. Apply 1 coat of POLIFIBER PRIMER and after 24 hours sand with fine abrasive paper. Apply then 2 coats of LONG LIFE STC WHITE antifouling allowing min.6 hours between coats. Bare Alluminium and Light Alloys bottoms - Degrease the surface with THINNER 765. Apply 1 coat of EPOFOND AM-9 and let dry for minimum 8 hours but do not exceed 24 hours. Apply 3 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat then with 2 coats of LONG LIFE STC BIANCA antifouling allowing min.12 hours between coats.
Product Specification
ANTIFOULINGS
LONG LIFE STC WHITE
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.520
Viscosity Ford ø 8 at 20°C ±2
14-15 sec
Application
Brush-Roller-Spray
Spray
5-8% Thinner 400
Launching time
Min 24-48 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
50-60 microns per coat
Colors
BIANCO
Binder type A
Synthetic
Solids content (volume) ±2
60%
Shelf life (+10+30°C)
12 months in airtight cans
Brush-Roller
Ready to use or max 5% Thinner 400
Touch dry
1-2 h (20°c)
Recoat time
min. 12 h ( 20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
9-10
Color code
3F6300