STANDARD PLUS STC WHITE

STANDARD PLUS STC WHITE

Self-polishing antifouling formulated with copper thyocianate, for use on all type of boats, including aluminium and light alloys. Suggested for medium speed boats up to 30 knots. The application of minimum 2 coats of antifouling is recommended.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Steel bottom - Apply 1 coat of EPOZINC 2C or EPOFOND AM-9 on sandblasted steel according to SA 2-2,5 and let dry for 12-24 hours. Apply then 2-3 coats of EPOFOND AM-9 allowing max.24 hours between coats (mimimum 6-8 hours). Overcoat then with 2 coats of STANDARD PLUS STC White antifouling allowing min.12-24 hours between coats. Bare Wood bottom - Apply one coat of EVIOX CROMOMINIO largely diluted and allow to dry. Apply 2 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat then with 2 coats of STANDARD PLUS STC White antifouling allowing min.12-24 hours between coats. Bare Fibreglass bottom - Degrease with suitable cleaner and rinse with water the surface to be coated. Sand with fine abrasive paper and remove dust. Apply 1 coat of EPOFOND AM-9 or POLIFIBER PRIMER and after 24 hours sand with fine abrasive paper. Apply then 2 coats of STANDARD PLUS STC White antifouling allowing min.12-24 hours between coats. Alluninium and Light Alloys bottom - Degrease the surface with THINNER 765. Apply 1 coat of EPOFOND AM-9 and let dry for minimum 8 hours but do not exceed 24 hours. Apply 3 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat then with 2 coats of STANDARD PLUS STC White antifouling allowing 12-24 hours between coats. Previously Coated Surfaces - If the old antifouling is still in good conditions, compatible, and well sticked on the substrate, it is enough to apply 1-2 coats of SOLVER PRIMER followed by 2 coats of STANDARD PLUS STC White antifouling, allowing 12-24 hours between coats.
Product Specification
ANTIFOULINGS
STANDARD PLUS STC WHITE
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.450
Viscosity Ford ø 8 at 20°C ±2
13-15
Application
Brush-Roller-Spray
Spray
5-8% Diluent 400
Launching time
Min 24-48 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40-50 microns per coat
Colors
BIANCO
Specific gravity kg/lt(±0,05)
1,500
Binder type A
Natural resins modified
Solids content (volume) ±2
51%
Shelf life (+10+30°C)
12 months in airtight cans
Brush-Roller
Ready to use or max 5% Thinner 400
Touch dry
1-2 h (20°c)
Recoat time
12 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10-11
Color code
3E6411