STANDARD PLUS

STANDARD PLUS

Self-polishing antifouling formulated with copper salts for use on wood, steel or fibreglass boats of medium speed up to 30 knots. The application of minimum 2 coats of antifouling is recommended.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Bare Steel Bottoms - Apply 1 coat of EPOZINC 2C on sandblasted steel according to SA 2,5/3 and let dry for 12-24 hours. Apply then 2-3 coats of EPOFOND AM-9 allowing max.24 hours between coats (minimun 6-8 hours). Overcoat then with 2 coats of STANDARD PLUS antifouling allowing min.18-24 hours between coats. Bare Wood - Apply one coat largely diluted of EVIOX CROMOMINIO and allow to dry for 8-12 hours. Apply 2 coats of SOLVER PRIMER allowing 24 hours between coats followed by 2 coats of STANDARD PLUS antifouling allowing min. 18-24 hours between coats. Fibreglass - Degrease with suitable cleaner and water and rinse the surface to be coated. Sand with fine abrasive paper and remove dust. Apply 1 coat of EPOFOND AM-9 or POLIFIBER PRIMER and after 24 hours sand with fine abrasive paper. Apply then 2 coats of STANDARD PLUS antifouling allowing min.18-24 hours between coats. Previously Coated Surfaces - If the old antifouling is still in sound conditions, compatible, and well sticked on the substrate, it is enough to apply 1-2 coats of SOLVER PRIMER followed by 2 coats of STANDARD PLUS antifouling allowing the required waiting time between coats. (If the old antifouling is in poor condition of adhesion or not compatible, remove the old paint down to bare surface and follow the directions as per bare surface)
Product Specification
ANTIFOULINGS
STANDARD PLUS
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.760 - 1.810 depending on colour
Viscosity Ford ø 8 at 20°C ±2
12 sec.
Application
Brush-Roller-Spray
Spray
10% Diluent 400
Launching time
Min 24-48 hours
Application temperature
Between +10 C and +40 C
Dry film thickness advised
50-60 microns per coat
Colors
ROSSO OX, NERO, BLU UNIVERSO, AZZURRO
Binder type A
Natural resins modified
Solids content (volume) ±2
42%
Shelf life (+10+30°C)
12 months in airtight cans
Brush-Roller
Ready to use or max 5% Thinner 400
Touch dry
3-4 h (20°c)
Recoat time
18-24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10-12
Color code
3E3922, 3E4240, 3E5975, 3E6199