SVERNIGRAF

SVERNIGRAF

Newly formulatied, solvent based paint remover of low environmental impact. The product does not contain Dichloromethane or N-Methyl Pyrrolidone and meets new regulations. Although it might require longer application times, the product can be used for the same purposes as the old traditional formulation containing Dichloromethane. Removes wall paints as well as one or two-component varnishes, primers and enamels from metals and wooden substrates.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Wall paints. Enamels and varnishes applied onto metals and wooden substrates. Apply evenly and abundantly on the paint to be removed using a spatula or a soft brush. Wait until the paint has softened completely and remove it with a metal spatula. Remove all the lifted paint with rags, paper or a wet sponge. Application time normally varies from 10 to 60 minutes. In the case of thick paint layers or twocomponent paints, it may be necessary to wait a longer time period (1-3 hours) before the paint to be removed is properly softened. if necessary repeat the application. The indicative coverage is approx. 2-3 m2/Lt but this will largely depend on the thickness and the type of paint to be removed.
Product Specification
PAINT REMOVERS
SVERNIGRAF
Paint Type
One component
Viscosity Ford ø 8 at 20°C ±2
2500 cps (Brookfield RD/60)
Application
Brush
Curing time
1-3 hours
Application temperature
Between +10 C and +40 C
Theoret. coverage m2/Lt
2-3 approx.
Colors
GEL
Specific gravity kg/lt (±0,05)
1.020
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
Ready for use (Clean tools with Nitro thinner)
Recoat time
24 h (20°c)
Relevant humidity
Less than 80%
Tool cleaning
Use nitro
Color code
7KC000