SINTOFILLER

SINTOFILLER

One component synthetic filler providing good adhesion, good filling power and good sandpapering characteristics. Used on wood, metals (previously treated with suitable primer). Recommended for light surface levelling and to smooth and make even any irregular surface. It can be overcoated with any type of synthetic paint suitable for wood and metals. SINTOFILLER is widely used for surface levelling of boats in one component coating systems and also in the wood industry and in the do-it-yourself field to fill up holes, small craters and any surface irregularity. SINTOFILLER makes all surfaces perfectly smooth and even before painting.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Wood - The surface should be clean, dry and free from dust. It is always recommended a light sandpapering in order to provide a suitable anchor pattern to the filler. Any trace of resin, wax and polishing products for wood should be carefully removed by solvent cleaning or by sandpapering. Apply one coat of SINTOFILLER in thin layers where necessary by spatula taking care to make a little pressure with the spatula in order to ensure adequate penetration into the substrate. Do not apply a high thickness direct in one single coat; if a high thickness filling is requested, it is recommended to build up the thickness with several coats of thin layers, allowing few hours between coats. Let dry and follow up with the recommended coating system. Metal - Apply SINTOFILLER over a suitable primer. Follow directions as suggested above for WOOD surfaces.
Product Specification
FILLERS
SINTOFILLER
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.800
Viscosity Ford ø 8 at 20°C ±2
Tixotropico
Viscosity Ford Ø4
Tixotropic
Sandable
After 24 hours
Spatula
Ready to use
Application temperature
Between +10 C and +40 C
Dry film thickness advised
max 500 microns per coat
Colors
BIANCO
Binder type A
Synthetic resin
Solids content (volume) ±2
67%
Shelf life (+10+30°C)
18 months in airtight cans
Application
Spatula
Touch dry
45 minutes (20°C)
Recoat time
24-48 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
1,8 ( at 500 microns)
Color code
H30580