PLAMUR FINISHER MDF

PLAMUR FINISHER MDF

Two-component epoxy finishing filler applied at low thickness for smoothing small and large surfaces of boats. Used in two-component coating systems. Once sanded provides a smooth and even finish ready to be overcoated.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Steel - Sandblasting accordingto SA 2,5. Apply a first coat of EPOFOND AM-9 and let dry. Sandpaper and apply EPOXY LIGHT FILLER NS and let dry for 24-48 hours. Apply PLAMUR FINISHER MDF to obtain a smoother surface. Sandpaper and follow up with the recommended coating system. Alluminium & Light Alloys-Fibreglass-Cement - Remove mechanicaly any oxidized layer from the substrate. Remove dust and degrease with THINNER 765. Apply one coat of EPOFOND AM-9 primer. After 12 hours sandpaper and apply EPOXY LIGHT FILLER NS and let dry for 24-48 hours. Apply PLAMUR FINISHER MDF to obtain a smoother surface. Sandpaper and follow up with the recommended coating system.
Product Specification
FILLERS
PLAMUR FINISHER MDF
Paint Type
Two components
Binder type B
Ammine adduct
Solids content (volume) ±2
100%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Spatula
Sandable
After 24 hours
Spatula
Ready to use
Application temperature
Between +10 C and +40 C
Dry film thickness advised
300 microns per coat
Colors
GRIGIO
Binder type A
Epoxy modified
Specific gravity kg/lt (±0,05)
1.540 (Sol.A) - 0.980 (Sol.B)
Viscosity Ford ø 8 at 20°C ±2
Tixotropico (A+B)
Viscosity Ford Ø4
Tixotropic (A+B)
Mixing ratio A+B by volume
1 part.Sol.A with 1 Sol.B
Touch dry
6-8 h ( 20°C)
Recoat time
Minimum 24-36 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
4 for a thickness of 250 microns
Color code
7F6332