EPOXY LIGHT FILLER NS

EPOXY LIGHT FILLER NS

Two-component light epoxy filler for high thickness surface levelling on steel, aluminium and light alloy boats and on concrete surfaces. This filler is very flexible and can be applied in a single coat. Its low specific gravity formulation allows to reduce the product load onto the coated substrate. Widely used in the boatyard industry. EPOXY LIGHT FILLER NS fairly withstand temperature variation with no problem of sagging, thickness shrinking or difficulty of application. EPOXY LIGHT FILLER NS is the result of long research and tests carried out in direct contact with professional applicators which allowed us to perform a high qualitative product.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Steel - Sandblasting according to SA 2,5. Apply a first coat of EPOFOND AM-9. After 12 hours sandpaper and apply EPOXY LIGHT FILLER NS and let dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain a smoother surface. Sandpaper and follow up with the recommended coating system. Alluminium And Light Alloys - Remove any oxidized layer fron the substrate mechanically. Remove dust and residuals and degrease with THINNER 765. Apply one coat of EPOFOND AM-9 primer. After 12 hours sandpaper and apply EPOXY LIGHT FILLER NS and let dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain a smoother surface. Sandpaper and follow up with the recommended coating system.
Product Specification
FILLERS
EPOXY LIGHT FILLER NS
Paint Type
Two components
Binder type B
Ammine adduct
Solids content (volume) ±2
100%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Spatula
Pot life A+B (20°C)
use within 1 hour
Touch dry
3-4 h (20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
from 0,5 to 2 cm per coat
Colors
VERDE
Binder type A
Epoxy
Specific gravity kg/lt (±0,05)
0.750 (Sol.A) - 0.750 (Sol.B)
Viscosity Ford ø 8 at 20°C ±2
TIxotropico (A+B)
Viscosity Ford Ø4
Trxotropic (A+B)
Mixing ratio A+B by volume
1 part Sol. A with 1 Sol. B
Sandable
After 24 hours
Spatula
Ready to use
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
0.1 at a thickness of 1 cm
Color code
7F5951