ELIPRIMER 2C

ELIPRIMER 2C

Epoxy satin primer for steel, brass, cast-iron and light alloys. Specifically applied as a primer on propellers, flaps and cast-iron bulbs, provides an excellent anchor pattern and long lasting anticorrosion barrier. The product is overcoated with Elifax New antifouling.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Propellers, Flaps and Cast-iron Bulbs. Steel - The substrate should be perfectly cleaned, dry, degreased and mechanically sanded. Apply two coats of ELIPRIMER 2C allowing the required waiting time between coats. Overcoat with two coats of ELIFAX NEW antifouling. Alluminium, Light Alloys, Brass - The surface should be clean, dry and slightly sanded. Apply 2 coats of ELIPRIMER 2C. Let dry for minimum 12. hours between coats. Overcoat with two coats of ELIFAX NEW antifouling. IMPORTANT HINT - It is necessary to dilute separately the Sol. A before adding the activator Sol.B. Once diluted add the activator Sol.B in the correct ratio specified and let stand the mixture for 10-15 minutes before starting application.
Product Specification
PRIMERS & UNDERCOATS
ELIPRIMER 2C
Paint Type
Two components
Binder type B
Polyammide
Code & colour B
8ZAM9B Transparent
Solids content (volume) ±2
37%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Pot life A+B (20°C)
use within 6-8 hours
Spray
20-30% Thinner 765
Recoat time
12-24 h ( 20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
8-9
Color code
5GBC00
Binder type A
Epoxy
Code & colour A
5GBC.White
Specific gravity kg/lt (±0,05)
1,370 (A) - 1,020 (B)
Viscosity Ford ø 8 at 20°C ±2
120-150 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
120-150 sec. (20°C) A+B
Mixing ratio A+B by volume
4 parts Sol. A with 1 Sol. B
Brush-Roller
20-30% Thinner 765
Touch dry
2 h ( 20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
30-40 microns per coat
Colors
BIANCO