EPOZINC 2C

EPOZINC 2C

Two-pack epoxy-coating formulated with high content of metal zinc. Used as a protective primer for sandblasted metal structures immersed in the water or exposed to weather. Also used as a primer for cold galvanizing. EPOZINC 2C must be applied within 6 hours from sandblasting. The product can withstand dry temperature of 250°C.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Steel. Sandblasting according to SA 2,5 is necessary before application of EPOZINC 2C. Apply EPOZINC 2C within 6 hours from sandblasting, in accordance with our thinning directions and overcoat with the recommended coating system.
Product Specification
PRIMERS & UNDERCOATS
EPOZINC 2C
Paint Type
Two components
Binder type B
Polyammide
Solids content (weight) ±2
85%
Viscosity Ford ø 8 at 20°C ±2
60-80 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
60-80 sec. (20°C)
Mixing ratio A+B by volume
85 parts Sol. A with 15 Sol. B
Pot life A+B (20°C)
use within 4-6 hours
As a primer on bare wood*
25-35% Thinner 765
Dust dry
30 minutes (20c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
40 microns per coat
Colors
GRIGIO
Binder type A
Epoxy
Specific gravity kg/lt (±0,05)
2,940 (A) - 0,920 (B)
Solids content (volume) ±2
27%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Mixing ratio A+B by weight
95 parts Sol. A with 5 Sol B
Brush-Roller
10-15% Thinner 765
Spray
25-35% Diluente 765
Recoat time
12 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
13 ( 4,5 m2/kg )
Color code
5J0000