EPOFOND H.B

EPOFOND H.B

High-build epoxy satin coating for all types of surfaces. The advantage to build up a thickness of 100-150 dry microns per coat allows sensible reduction of labour costs. Overcoatable with chlorinated rubber, epoxy or polyurethane coatings for high quality long lasting anticorrosive coating systems. Provides outstanding chemical resistance in the marine environment, both in atmosphere or immersion conditions. Excellent as anti-osmosis pre-treatment on fibreglass boats.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - Steel - Sandblasting according to SA 2,5 is recommended. If sandblasting is not possible, the substrate should be cleaned perfectly, degreased, free from traces of corrosion and mechanically sanded. In case of pre-existing epoxy, polyurethane or zinc-based undercoats in good conditions overcoat with 1 coat of EPOFOND HB followed by 1-2 coats of POLIFOND Primer, allowing the required waiting time between coats. Overcoat then with the recommended topcoat. Bare Galvanized Steel - The surface should be clean, dry and well degreased. Apply 1 coat of EPOFOND H.B. as suggested. Previously Painted Galvanized Steel - Remove any trace of corrosion by sanding. The surface should be clean, dry and well degreased. Apply 1 coat of EPOFOND H.B. as suggested Fibreglass - The surface should be dry, degreased and slightly sanded with fine abrasive paper. Apply 1 coat of EPOFOND H.B. as suggested. Cement - The surface should be clean, dry, well seasoned and free from loosing particles. Apply 1 coat of EPOFOND H.B. as suggested.
Product Specification
PRIMERS & UNDERCOATS
EPOFOND H.B
Paint Type
Two components
Binder type B
Ammine adduct
Solids content (weight) ±2
75%
Viscosity Ford ø 8 at 20°C ±2
Tixotropico (A+B)
Viscosity Ford Ø4
Tixotropic (A+B)
Mixing ratio A+B by volume
4 parts Sol. A with 1 Sol. B
Pot life A+B (20°C)
use within 6-8 hours
As a primer on bare wood
15-20% Thinner 765
Touch dry
2-3 h (20°C)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
150 microns per coat
Colors
BIANCO
Binder type A
Epoxy
Specific gravity kg/lt (±0,05)
1,460 (A) - 1,020 (B)
Solids content (volume) ±2
45%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Mixing ratio A+B by weight
100 parts Sol. A with 16 Sol. B
Brush-Roller
10-15% Thinner 765
Spray
15-20% Diluente 765
Recoat time
12-24 h (20°C)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
4-5 (3-4 m2/kg)
Color code
5G1145