POLIFIBER PRIMER

POLIFIBER PRIMER

Special two-component primer formulated to provide excellent adhesion to fibreglass surfaces. It is applied as a basecoat on topsides, superstructures and hulls below the waterline of fibreglass boats. It can be applied direct onto gelcoat provided that a suitable surface degreasing and light sanding with fine abrasive paper is being carried out before its application.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE Fibreglass or Plastic. The surface to be coated should be degreased with suitable detergent material, rinsed and slightly sanded with fine abrasive paper. Remove dust and clean the surface. Apply one coat of POLIFIBER PRIMER followed if required by a second coat in the event the of a particularly rough surface. After 24 hours sand with fine abrasive paper and follow up with the recommended coating system.
Product Specification
PRIMERS & UNDERCOATS
POLIFIBER PRIMER
Paint Type
Two components
Binder type B
Isocyanates
Solids content (volume) ±2
35%
Shelf life (+10+30°C)
12 months in airtight cans
Application
Brush-Roller-Spray
Pot life A+B (20°C)
use within 4-6 hours
Spray
25-35% Diluent 203
Recoat time
18-24 h (20°c)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10
Color code
4S4182
Binder type A
Polyester
Specific gravity kg/lt (±0,05)
1,685 (A) - 1,040 (B)
Viscosity Ford ø 8 at 20°C ±2
40-60 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
40-60 sec.A+B Ford cup ø4 (20°C)
Mixing ratio A+B by volume
10 Part. Sol.A with 3 Part. Sol. B
Brush-Roller
15-30% Diluent 203 o 205
Touch dry
2-3 h ( 20°c)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
50 microns per coat
Colors
BIANCO