ELIPRIMER 1C

ELIPRIMER 1C

Special one-component primer for direct application onto metals such as brass, bronze, aluminium and steel. It can be overcoated with one component paints and in particular, for boat propellers, with ELIFAX NEW antifouling. Provides excellent adhesion onto the substrate as well as for the following coats.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE - METAL (BOAT PROPELLERS): Degrease the surface with a suitable solvent (nitro, epoxy or polyurethane based. Sandblast if possible or in alternative sand with coarse grain sandpaper (80-100 grit). The substrate should have a suitable anchor pattern. Do not use old sandpaper or wire brush as it may give a polished substrate and reduce the anchor properties for the primer application. Remove dust with a dry vacuum cleaner. Avoid touching the surface with hands in order not to leave traces of grease or dirt which could impair the application. Apply a first coat of ELIPRIMER 1C allowing the recommended waiting time between coats. Wait from a minimum of 3 hours to a maximum of 12 hours (20°C) and overcoat with a first coat of ELIFAX NEW antifouling. Apply a second coat of ELIFAX NEW antifouling within 3 hours from the application of the first coat. Launch into water after a minimum of 24 hours.
Product Specification
PRIMERS & UNDERCOATS
ELIPRIMER 1C
Paint Type
One component
Specific gravity kg/lt (±0,05)
1.200
Viscosity Ford ø 8 at 20°C ±2
90-150 sec. (Ø4 a 20°C)
Viscosity Ford Ø4
90-150 sec. (Ø4 a 20°C)
Brush-Roller
5-10% Diluent 765
Touch dry
60 minute (20°C)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
20 microns by hand
Colors
VERDE
Binder type A
Synthetic
Solids content (volume) ±2
23%
Shelf life (+10+30°C)
18 months in airtight cans
Application
Brush-Roller-Spray
Spray
5-10% Diluent 765
Recoat time
Minimum 4 h (20°C)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
10
Color code
4P5241