SOLVER PRIMER

SOLVER PRIMER

Primer and intermediate undercoat based on chlorinated rubber, formulated with aluminium and rust inhibitor pigments. Applied as intermediate undercoat between old and new antifouling or in anticorrosive coating systems. Provides outstanding resistance in marine and industrial environment. Recommended on metal structures exposed in marine environment.
Brand : SKIPPER'S LINE MARINE PAINTS
Description
SURFACE PREPARATION AND APPLICATION PROCEDURE- Steel - Apply one coat of EPOZINC 2C or EPOFOND AM-9 onto sandblasted steel and let dry for 12-24 hours. If sandblasting is not possible the substrate should be mechanically brought back to bare steel. Clean the surface and apply one primer coat of EVIOX CROMOMINIO and let dry for 24 hours. Apply 1-2 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat with the recommended finish. Boat bottom - Apply 2-3 coats of SOLVER PRIMER on a suitable basecoat allowing 24 hours between coats and overcoat with 2-3 coats of antifouling paint. Boat topsides - Apply 2 coats of SOLVER PRIMER on a suitable basecoat allowing 24 hours between coats and overcoat with 2 coats of recommended topcoat enamel.
Product Specification
PRIMERS & UNDERCOATS
SOLVER PRIMER
Paint Type
One component
Specific gravity kg/lt (±0,05)
1,250
Viscosity Ford ø 8 at 20°C ±2
20''
Application
Brush-Roller-Spray
Spray
15-30% Thinner 400
Recoat time
Minimum 6 h (20°)
Relevant humidity
Less than 80%
Theoret. coverage m2/Lt
4-6
Color code
2U3900
Binder type A
Chlorinated-alkyd
Solids content (volume) ±2
30%
Shelf life (+10+30°C)
18 months in airtight cans
Brush-Roller
10-25% Thinner 400
Touch dry
2-3 h (20°C)
Application temperature
Between +10 C and +40 C
Dry film thickness advised
60-70 microns per coat
Colors
Giallo